Product Description
Hardy 1329265 Drag Lock Screw, LEFT HAND
The Hardy 1329265 Drag Lock Screw is a critical safety and structural fastener used to secure the drag assembly or spindle within several modern Hardy Large Arbor series. The "LEFT HAND" designation indicates that this screw uses a Reverse Thread (counter-clockwise to tighten). This is a deliberate engineering choice to prevent the screw from backing out during the rotation of the spool, particularly when a fish is running and the drag is engaged.
As a genuine Hardy component from the Alnwick-designed modern range, this screw is precision-machined to ensure a flush fit and maximum torque stability. Using the correct OEM left-hand screw is vital; attempting to force a standard right-hand screw into this housing will permanently strip the threads of the spindle or frame.
Product Specifications
-
Part Name: Drag Lock Screw / Spindle Retaining Screw
-
Manufacturer Part Number (MPN): 1329265
-
Thread Direction: Left Hand (Reverse Thread)
-
Material: High-tensile, corrosion-resistant stainless steel.
-
Compatibility: High-performance Disc Drag and Large Arbor series.
Models This Part Fits
The 1329265 screw is a specialized component found in reels where rotational forces might otherwise loosen a standard screw. It is a direct OEM replacement for:
-
Hardy Ultralite DD Series: 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000
-
Hardy Ultralite MA DD Series: All sizes
-
Hardy CLS Series: 5000, 7000, 9000
-
Hardy ASR Series: 4000 through 9000
-
Hardy MTX / MTX-S Series
Critical Warning: Because this is a Left-Hand thread, you must turn the screwdriver Clockwise to Loosen and Counter-Clockwise to Tighten. To verify the exact torque position on your specific reel, consult the technical PDF diagrams at www.reelschematic.com.
Key Features
-
Safety Lock Mechanism: The reverse-thread design acts as a mechanical fail-safe, ensuring that the friction of the spool rotation actually helps keep the screw seated.
-
Precision Head Geometry: Designed with a low-profile head to ensure it does not interfere with the spool's internal face or the drag regulator.
-
Marine-Grade Stainless Steel: Built to withstand the harsh conditions of saltwater and brackish environments without rust or pitting.
-
High Torque Resistance: The metal alloy is hardened to prevent the driver slot from "rounding off" during maintenance.
Maintenance & Installation
Because this screw is often the only thing preventing the drag stack or spindle from shifting, proper lubrication during installation is essential to prevent it from seizing over time. We recommend Deuthlon high-performance lubricants:
-
Anti-Seize Barrier: Apply a small amount of Deuthlon Power Grease to the left-hand threads before installation. This prevents the stainless steel screw from "galling" or seizing into the aluminum frame—a common issue known as "cold welding."
-
Moisture Protection: Once the screw is tightened, a light drop of Deuthlon Reel Gear Oil over the head of the screw will create a polarized barrier, shedding water and preventing salt crystals from forming in the driver slot.