Rocket Tuned by Mike's

Abu 2500Ci Bearing Drive Shaft NLA

Custom drive shaft with ball bearing in the base portion. This bearing supports the bulk of the load imposed on the drive shaft as the handle is turned under pressure. Outer portion of the drive...

7000 Hi-Speed (spool only) --NLA

This part is NLA.

Abu 7000 High Speed Fishing Gear Kit - 5.5:1 Ratio

We have found a supplier to make these gear sets for us! This kit will change the gear ratio of your Ambassadeur 7500, 7500CT, BG7000HS, BG7000HSN High Speed series reel to 5.5:1 (stock was 5.3:1)...

Daiwa BG30 Carbon Drag Kit

Installing this kit will give you a smoother, fade free, longer lasting drag system. Kit includes all 3 washers inside the spool. You'll be more than impressed with this kit!   3X 6-155

Abu 7000i Instant Anti Reverse Bearing

Instant Anti Reverse (clutch) bearing to fit Abu 'i' series reels with IAR already installed. Bearing measures 12mm ID x 18mm OD x 16mm Length. These bearings are not available from Abu but we have...

5 X 11 X 4mm Ceramic Hybrid Bearing

5x11x4mm Ceramic Hybrid Bearing, open one side for easier cleaning. Very common size on casting reels that have a bearing under the drive pin.

Daiwa Handle Bearing Kit 4x7x2.5

4x7x2.5mm  Bearings. Open on one side for easier cleaning. Common bearing size to fit Daiwa casting reels with removable handle knobs. As there are alot of models these bearings will fit, this...

Daiwa Luna 100 Spool Bearing Kit

Fits Daiwa Luna 100 & 100L reels Includes side plate bearing and the bearing under the spool drive pin (no part#). These bearings are incredibly fast and are our NEW STYLE bearings with one side...

Shimano Soccorro 8000F Carbon Drag Kit

This is the HT100 drag upgrade, which we feel is the best all around washer for ANY reel. It offers a smooth startup, good holding power, and because it is a carbon drag washer, will not heat up and...

Daiwa 250RL Carbon Drag Kit

This is the HT100 drag upgrade, which we feel is the best all around washer for ANY reel. It offers a smooth startup, good holding power, and because it is a carbon drag washer, will not heat up and...

Daiwa Lightened and Polished Spool

This particular spool was from a Daiwa TD-A 153 HST baitcast reel. The spool wieghed in at 25.85 grams before the lightening procedure and now weighs in at 25.33 grams. Over a half ounce of...

1/8' x 3/8' x 5/32' Stainless Bearing

1/8" ID x 3/8" OD x 5/32" W Stainless Steel bearing, sheilded one side to facilitate easier cleaning Can substitute for Penn 26-13H (need to use your original bearing cup)