Rocket Tuned by Mike's

Okuma SI40a Carbon Drag Upgrade

Carbon drag kit that will fit your Okuma Stinson SI40a spinning reel.Kit contains 3 carbon drag washers6-360

DAIWA AD47LC CARBON DRAG KIT

Fits: ACCUDEPTH AD17LC, 27LC, 27LCW, AD47LC/57LC, AD47LCi/57LCi Set of 3 washers Replaces Daiwa part #'s W60-7301 (X2), W60-7101 This is the HT100 drag upgrade, which we feel is the best all around...

Daiwa SKA1655 Carbon Drag Kit

This is the HT100 drag upgrade for the Daiwa SKA 1655 rear drag spinning reel. It offers a smooth startup, good holding power, and because it is a carbon drag washer, will not heat up and fade like...

8X14X10mm Clutch Bearing

HF081410 One Way Clutch Bearing, made for us to EU spec standards. High Quality at an affordable price!Dimensions: C: 10mm, Fw: 8mm, D: 14mmNote: these bearings do not fit the Ambassadeur side plates.

Daiwa LEXA 300 Series Spool Bearing Kit - Ceramic ABEC 7

Si3N4 Ceramic balls. Fits Daiwa LEXA 300H, HS, HS-P, PWR reels with bearing part #140-1500 and the right side spool bearing (no part#). These bearings are incredibly fast and are our NEW STYLE...

Abu 7000 High Speed Gear & Spool Kit - Silver -- NLA

***SOLD OUT OF SPOOLS***  

Quantum Optix 80 Carbon Drag Kit

This Carbon Fiber drag kit will increease the drag potential of your Quantum Optix 80 spinning reel about 3 times! The carbon washers will not fade after a monster fish takes a long run. Repeated,...

Abu Super Power Handle (S) - ONLY AVAIL IN GOLD

Sorry the silver version is no longer available. Can still be purchased in gold - SUPERPOWER-G This is our awesome Power handle that we install on our UC series of Custom Reels. These are super...

Daiwa AS7050 & AS9050 A/R Repair Kit

Sorry, this kit is currently no longer available unless we can locate more stock of the 142-3421 A/R pawl springs The B80-4301 A/R Claw Plate (black rubber part) is no longer available so we needed...

BAITRUNNER 3500 CARBON DRAG KIT

CARBON DRAG KIT TO FIT SHIMANO BTR3500 BAITRUNNER SERIES REELS. THIS KIT IS FOR THE MAIN DRAG IN THE SPOOL, NOT THE BAITRUNNER DRAG IN THE REAR. 6 155 3

Shakespeare Tidewater 30 Cast Cap Assy

New Design! CUSTOM MADE Spool tension cap for the Shakespeare TW30 series, which has been discontinued. Replaces part # 1146921 or 1145218. Custom made by Mike, made out of machined aluminum (or...

Shimano Curado 100 Drive Shaft Bearing, Ceramic ABEC7 5x9x3mm

Fits Shimano Curado 100 casting reels with drive shaft bearing part #BNT0031. Ball bearings are rated in a classification system know as ABEC....Annular Bearing Engineering Committee. Bearings in the...