Rocket Tuned by Mike's

Daiwa BG30 Carbon Drag Kit

Installing this kit will give you a smoother, fade free, longer lasting drag system. Kit includes all 3 washers inside the spool. You'll be more than impressed with this kit!   3X 6-155

Abu 7000i Instant Anti Reverse Bearing

Instant Anti Reverse (clutch) bearing to fit Abu 'i' series reels with IAR already installed. Bearing measures 12mm ID x 18mm OD x 16mm Length. These bearings are not available from Abu but we have...

5 X 11 X 4mm Ceramic Hybrid Bearing

5x11x4mm Ceramic Hybrid Bearing, open one side for easier cleaning. Very common size on casting reels that have a bearing under the drive pin.

Daiwa Handle Bearing Kit 4x7x2.5

4x7x2.5mm  Bearings. Open on one side for easier cleaning. Common bearing size to fit Daiwa casting reels with removable handle knobs. As there are alot of models these bearings will fit, this...

Daiwa Luna 100 Spool Bearing Kit

Fits Daiwa Luna 100 & 100L reels Includes side plate bearing and the bearing under the spool drive pin (no part#). These bearings are incredibly fast and are our NEW STYLE bearings with one side...

Hardy Perfect Frame Repair

Here we have taken a 3 3/8"  Hardy Perfect with a broken frame and repaired it. The peice was missing completely so a new peice of the frame needed to be built and set in place. These repairs...

Shimano Soccorro 8000F Carbon Drag Kit

This is the HT100 drag upgrade, which we feel is the best all around washer for ANY reel. It offers a smooth startup, good holding power, and because it is a carbon drag washer, will not heat up and...

Hardy Longstone Spool Repair

This old Hardy Longstone came to us in a collection of reels to be refurbished. This was by far the worst one in the collection as most of the spool had corroded and broken away. All that was left of...

Daiwa 250RL Carbon Drag Kit

This is the HT100 drag upgrade, which we feel is the best all around washer for ANY reel. It offers a smooth startup, good holding power, and because it is a carbon drag washer, will not heat up and...

Rapala Moocher Click Spring

FEB 11/21 - 1 Remaining in stock then no longer available, sorry. Click spring for Rapala North Coast NC1 & Classic CM-1 Mooching reels. These springs are a close match and about the same...

1/8' x 3/8' x 5/32' Stainless Bearing

1/8" ID x 3/8" OD x 5/32" W Stainless Steel bearing, sheilded one side to facilitate easier cleaning Can substitute for Penn 26-13H (need to use your original bearing cup)

Okuma SI40a Carbon Drag Upgrade

Carbon drag kit that will fit your Okuma Stinson SI40a spinning reel.Kit contains 3 carbon drag washers6-360